TELEX Bundle
TELEX Bundle
TELEX Bundle
bpcmusic

TELEX Bundle

Regular price $315.00

This bundle contains one TELEXo and one TELEXi to outfit your Monome Teletype with additional input and output capabilities. The expanders are packaged and shipped together. Details for the individual modules are below.

--

The TELEXi (or TXi) is an Open Source, 4HP Input Expander for the Monome Teletype.

Each 4HP TXi module adds 4 IN jacks and 4 PARAM knobs to the Teletype. It has little jumpers on the back so you can hook more than one TXi (or its brother the TXo) to your Teletype simultaneously over the II bus (i2c).

The IN jacks are bipolar (-10V to +10V). They work just like the Teletype IN and PARAM operators (TI.IN and TI.PARAM). It also has some extended functionality where the TXi can do quantization for you and return note numbers against any one of its internal scales (there are about 12 or so). Inputs are sampled with 13bit resolution.

  • 46 mA +12V
  • 5 mA -12V
  • 0 mA 5V
  • 36 mm Depth

Visit the TXi on Modular Grid

The TXi is an Open Source module. Build one yourself or hack the firmware; all details are on the TELEX GitHub Project Site.

--

The TELEXo (or TXo) is an Open Source, 4HP Output Expander for the Monome Teletype

Each 4HP TXo module adds and additional 4 Trigger and 4 CV jacks to the Teletype. It has little jumpers on the back so you can hook more than one TXo (or its brother the TXi) to your Teletype simultaneously over the II bus (i2c).

All Teletype output functionality is supported by the TXo. Operators are near-identical for basic functionality, just put a "TO.” in front of the set you already know. The outputs are a little different; the triggers are +5V triggers and the CV outputs are bipolar (-10V to +10v) with 16 bit resolution over that range.

Extended functionality of the TXo starts with being able to specify longer values for slew and pulse times (in seconds and minutes).

The TXo also has the following “experimental” features for each of its four CV outputs:

  • a quantizer with a dozen or so microtonal scales in addition to equal temperament
  • an oscillator (not currently band-limited) that supports frequencies from LFO rates up to around 8kHz with variable waveforms (sine, triangle, saw, variable width square, and noise), and frequency slew (portamento)
  • an AR (attack + release) envelope generator with times in milliseconds, seconds and minutes

These extended features, when combined together, can really push the envelope of the TXo’s processor and do some crazy stuff. For example: the output's envelope generator can act as a VCA, which turns the expander into a little 4-voice synth.

  • 51 mA +12V
  • 7 mA -12V
  • 0 mA 5V
  • 36 mm Depth
  • 4HP

Visit the TXo on Modular Grid

The TXo is an Open Source module. Build one yourself or hack the firmware; all details are on the TELEX GitHub Project Site.